BK Resources BKG-QDC-50 1/2" Gas Quick Disconnect Fitting
The BKG-QDC-50 is BK Resources' 1/2" FPT gas quick disconnect, cCSAus certified, with a 1-year warranty. It lets a gas hose be disconnected from the appliance for equipment maintenance and cleaning, then reconnected without tools. BK's quick connect complies with ANSI Z21.41 • CSA 6.9.
BK's rules for the quick disconnect
- It must be sized to the gas hose: this 1/2" fitting matches BK's 1/2" hoses.
- Maximum fuel gas pressure is 1/2 psi (3.5 kPa). It's approved for 1st, 2nd and 3rd family gases under 50 mbar.
- Follow the gas-flow arrows on the fitting, and verify them before operation.
- It is not for dual-fed gas manifold lineups; only the shut-off ball valve can be used there.
- It has movable internal parts. Don't adjust or repair it; shut off the gas and call qualified personnel.
Disconnecting and reconnecting
Turn all gas supply and appliance knobs fully off, pull back the coupler to release the hose nipple, and keep the hose and nipple clean and off the floor. Unhook the restraining cable once the hose is off. To reconnect, reattach the cable, pull back the coupler, push the nipple in until it clips, tug lightly to confirm there's no gap, then turn the gas on at the ball valve and check for leaks.
Other 1/2" BK parts
- 1/2" shut-off ball valve ($27)
- 1/2" 90° male-to-female elbow ($9)
- 1/2" Swivel Pro ($150)
- Everything together: the 1/2" x 48" Kit #3 ($315) includes hose, valve, quick disconnect, restraining cable and two elbows.
Installation and leak testing must be done by qualified personnel to the National Fuel Gas Code (ANSI Z223.1) and local codes. See our gas hose installation guide for BK's full instructions.
Specifications
| Model | BKG-QDC-50 |
|---|---|
| Type | Gas quick disconnect |
| Size | 1/2" FPT |
| Standard | ANSI Z21.41 • CSA 6.9 |
| Max gas pressure | 1/2 psi (3.5 kPa) |
| Certification | cCSAus |
| Warranty | 1 year |