Commercial Gas Hoses
Save 28%
Atosa WA300001 3/4" x 48" Gas Hose Kit with Quick Disconnect, Gas Valve & Restraining Cable
Atosa WA300001 3/4" x 48" Gas Hose Kit with Quick Disconnect, Gas Valve & Restraining Cable
The Atosa WA300001 is a complete 3/4" x 48" gas connection kit for commercial kitchen equipment, stationary or on casters, running on natural gas o...
View full detailsBK Resources BKG-GHC-7548-SCK3 3/4" x 48" Gas Hose Connector Kit #3 with Quick Disconnect & Shut-Off Valve
Kit #3 is the most complete standard kit, with everything needed to connect a caster-mounted appliance, including the code-required shut-off valve....
View full detailsBK Resources CP-7548-SCK3 Premier Case Pack of (5) 3/4" x 48" Gas Hose Connection Kits #3
The CP-7548-SCK3 is BK Resources' Premier Case Pack: five BKG-GHC-7548-SCK3 Gas Hose Connection Kits #3 in one order, with free shipping.What's in ...
View full detailsBK Resources BKG-GHC-7536-SCK3 3/4" x 36" Gas Hose Connector Kit #3 with Quick Disconnect & Shut-Off Valve
Kit #3 is the most complete standard kit, with everything needed to connect a caster-mounted appliance, including the code-required shut-off valve....
View full detailsBK Resources BKG-GHC-7560-SCK3 3/4" x 60" Gas Hose Connector Kit #3 with Quick Disconnect & Shut-Off Valve
Kit #3 is the most complete standard kit, with everything needed to connect a caster-mounted appliance, including the code-required shut-off valve....
View full detailsBK Resources BKG-GHC-7524-SCK3 3/4" x 24" Gas Hose Connector Kit #3 with Quick Disconnect & Shut-Off Valve
Kit #3 is the most complete standard kit, with everything needed to connect a caster-mounted appliance, including the code-required shut-off valve....
View full detailsBK Resources BKG-GHC-7572-SCK3 3/4" x 72" Gas Hose Connector Kit #3 with Quick Disconnect & Shut-Off Valve
Kit #3 is the most complete standard kit, with everything needed to connect a caster-mounted appliance, including the code-required shut-off valve....
View full detailsBK Resources BKG-GHC-7548-SCK2 3/4" x 48" Gas Hose Connector Kit #2 with Quick Disconnect
Kit #2 is the pro plumber kit: hose, quick disconnect and restraining cable, for installers who supply their own valve and fittings.For caster-moun...
View full detailsBK Resources BKG-GHC-7536-SCK2 3/4" x 36" Gas Hose Connector Kit #2 with Quick Disconnect
Kit #2 is the pro plumber kit: hose, quick disconnect and restraining cable, for installers who supply their own valve and fittings.For caster-moun...
View full detailsBK Resources BKG-GHC-7560-SCK2 3/4" x 60" Gas Hose Connector Kit #2 with Quick Disconnect
Kit #2 is the pro plumber kit: hose, quick disconnect and restraining cable, for installers who supply their own valve and fittings.For caster-moun...
View full detailsBK Resources BKG-GHC-7524-SCK2 3/4" x 24" Gas Hose Connector Kit #2 with Quick Disconnect
Kit #2 is the pro plumber kit: hose, quick disconnect and restraining cable, for installers who supply their own valve and fittings.For caster-moun...
View full detailsBK Resources BKG-GHC-7572-SCK2 3/4" x 72" Gas Hose Connector Kit #2 with Quick Disconnect
Kit #2 is the pro plumber kit: hose, quick disconnect and restraining cable, for installers who supply their own valve and fittings.For caster-moun...
View full detailsBK Resources BKG-GHC-7548-SCK9 3/4" x 48" Gas Hose Connector Kit #9 with Quick Disconnect, Shut-Off Valve & Elbows
Kit #9 adds threaded nipples and female elbows for installations that need them.For caster-mounted commercial cooking equipment such as fryers, ran...
View full detailsBK Resources BKG-GHC-7536-SCK9 3/4" x 36" Gas Hose Connector Kit #9 with Quick Disconnect, Shut-Off Valve & Elbows
Kit #9 adds threaded nipples and female elbows for installations that need them.For caster-mounted commercial cooking equipment such as fryers, ran...
View full detailsBK Resources BKG-GHC-7560-SCK9 3/4" x 60" Gas Hose Connector Kit #9 with Quick Disconnect, Shut-Off Valve & Elbows
Kit #9 adds threaded nipples and female elbows for installations that need them.For caster-mounted commercial cooking equipment such as fryers, ran...
View full detailsBK Resources BKG-GHC-7524-SCK9 3/4" x 24" Gas Hose Connector Kit #9 with Quick Disconnect, Shut-Off Valve & Elbows
Kit #9 adds threaded nipples and female elbows for installations that need them.For caster-mounted commercial cooking equipment such as fryers, ran...
View full detailsBK Resources BKG-GHC-7572-SCK9 3/4" x 72" Gas Hose Connector Kit #9 with Quick Disconnect, Shut-Off Valve & Elbows
Kit #9 adds threaded nipples and female elbows for installations that need them.For caster-mounted commercial cooking equipment such as fryers, ran...
View full detailsBK Resources BKG-GHC-7548-SW3 3/4" x 48" Swivel Pro Gas Hose Connector Kit
Includes a Swivel Pro™ connector, which gives two points of 360° rotation with zero flow restriction, for difficult installations and less stress o...
View full detailsBK Resources BKG-GHC-7536-SW3 3/4" x 36" Swivel Pro Gas Hose Connector Kit
Includes a Swivel Pro™ connector, which gives two points of 360° rotation with zero flow restriction, for difficult installations and less stress o...
View full detailsBK Resources BKG-GHC-7560-SW3 3/4" x 60" Swivel Pro Gas Hose Connector Kit
Includes a Swivel Pro™ connector, which gives two points of 360° rotation with zero flow restriction, for difficult installations and less stress o...
View full detailsBK Resources BKG-GHC-7524-SW3 3/4" x 24" Swivel Pro Gas Hose Connector Kit
Includes a Swivel Pro™ connector, which gives two points of 360° rotation with zero flow restriction, for difficult installations and less stress o...
View full detailsBK Resources BKG-GHC-7572-SW3 3/4" x 72" Swivel Pro Gas Hose Connector Kit
Includes a Swivel Pro™ connector, which gives two points of 360° rotation with zero flow restriction, for difficult installations and less stress o...
View full detailsBK Resources BKG-GHC-7548-2SW3 3/4" x 48" 2x Swivel Pro Gas Hose Connector Kit
Swivel Pro™ connectors on both ends of the hose give the most freedom of movement and the least stress on the hose.For caster-mounted commercial co...
View full detailsBK Resources BKG-GHC-7536-2SW3 3/4" x 36" 2x Swivel Pro Gas Hose Connector Kit
Swivel Pro™ connectors on both ends of the hose give the most freedom of movement and the least stress on the hose.For caster-mounted commercial co...
View full detailsBK Resources BKG-GHC-7560-2SW3 3/4" x 60" 2x Swivel Pro Gas Hose Connector Kit
Swivel Pro™ connectors on both ends of the hose give the most freedom of movement and the least stress on the hose.For caster-mounted commercial co...
View full detailsCommercial Gas Hoses for Restaurant Kitchens
GasHoses.com sells commercial gas hoses and connector kits for restaurant kitchens: the flexible gas lines that connect fryers, ranges, ovens, griddles and charbroilers to your natural gas or propane supply. These are not hardware-store appliance connectors. Every hose here is certified for movable commercial cooking equipment, comes in diameters and lengths sized for a real cooking line, and can be bought as a bare replacement hose or a complete code-ready kit.
Most restaurants run on a 3/4 inch gas hose, so that's where we start. Shop 3/4" commercial gas hoses or browse the full gas hose collection.
Why Restaurants Use 3/4" Gas Hoses
A 3/4" gas hose is the standard connection for full-size commercial cooking equipment. It carries enough gas for most single appliances on a cooking line, and it's the size with the most options: every kit configuration, swivel and placement upgrades, stationary connectors and multi-kit case packs.
For a new caster-mounted appliance, the usual choice is a 3/4" Kit #3. It includes the hose, a shut-off ball valve, a quick disconnect, a restraining cable and two 90° elbows, so the installer has everything needed for a code-compliant movable hookup.
- 3/4" x 36" Kit #3: for equipment that sits close to the gas outlet.
- 3/4" x 48" Kit #3: the most common commercial fryer and range hose.
- 3/4" x 60" Kit #3: for longer runs or equipment that rolls farther out for cleaning.
Also available in 24" and 72". Need a different diameter? A 1/2" hose such as the 1/2" x 48" Kit #3 suits light-duty countertop equipment with a 1/2" inlet, and a 1" hose such as the 1" x 48" Kit #3 is for high-input appliances that need more gas than a 3/4" line can carry.
Gas Hoses by Appliance
Start with the appliance you're connecting. Always confirm the BTU per hour rating on the data plate and the size of the gas inlet before you order.
| Appliance | Typical hose | Good starting point |
|---|---|---|
| Gas floor fryer | 3/4", 36" to 48" | 3/4" x 48" Kit #3 |
| Restaurant range or stove | 3/4", 48" to 60" | 3/4" x 60" Kit #3 |
| Convection or deck oven on casters | 3/4", 36" to 48" | 3/4" x 48" Kit #3 |
| Floor-model griddle or charbroiler | 3/4", 36" to 48" | 3/4" x 36" Kit #3 |
| Bolted-down or built-in equipment | 3/4" stationary connector | 3/4" x 48" stationary kit |
| Countertop griddle, hot plate or small charbroiler | 1/2" | 1/2" x 48" Kit #3 |
| Large range with ovens or other high-input equipment | 1" | 1" x 48" Kit #3 |
These are typical setups, not a substitute for the appliance's specifications. If the BTU load is close to a hose's rating at the length you need, go up a diameter or choose a shorter length. See the BTU capacity chart below for ratings by diameter and length.
Commercial Fryer Gas Hoses
The gas fryer is the appliance most likely to need a new hose. Floor fryers sit on casters and get pulled out for oil changes, filtering and nightly cleaning, often while they're still hot and coated in grease. That daily movement is exactly what a commercial gas connector is built for, and it's why the restraining cable and quick disconnect matter more on a fryer than almost anywhere else on the line.
Most full-size floor fryers use a 3/4" hose, and the 3/4" x 48" Kit #3 is the most common fryer hookup. If the fryer sits close to the gas outlet, a 3/4" x 36" Kit #3 keeps extra hose off the floor. A few fryer-specific points:
- Fryer batteries: when two or more fryers sit side by side, each one needs its own connector, quick disconnect and restraining cable.
- Tight lines: if fryers sit close to the wall, a 3/4" x 36" Swivel Pro kit lets the hose rotate instead of twisting as the fryer moves.
- Staying under the hood: fryers need to return to the same spot under the fire suppression system after cleaning. The Set-Pro + Swivel Pro kit adds floor placement plates to the swivel kit.
- Before moving it: shut off the gas valve, disconnect the quick disconnect, then unhook the restraining cable, and let hot oil cool before rolling the fryer out.
Restaurant Range and Stove Gas Hoses
A restaurant range combines several open burners, often with a griddle top, a charbroiler section and one or two ovens below, all running off one gas inlet. That makes it one of the highest-input appliances on most cooking lines, so size the hose to the total BTU on the data plate, not to any one burner.
- Standard ranges: most full-size restaurant ranges use a 3/4" hose. Ranges are wide, and the gas inlet doesn't always line up with the wall outlet, so measure the actual run. 48" or 60" is common. Start with the 3/4" x 48" Kit #3 or the 3/4" x 60" Kit #3.
- Large ranges: a wide range with many burners and two ovens can need more gas than a 3/4" hose carries at longer lengths. Compare the data plate total with the BTU capacity chart, and step up to a 1" x 48" Kit #3 if needed.
- Casters or legs: a range on casters needs a movable kit with a restraining cable. A range set on legs that is never moved can use a stationary connector such as the 3/4" x 48" stationary kit. Stationary kits come with female or male ends, so check both connection points first; see the male-female version.
Commercial Oven Gas Hoses
Gas convection ovens, deck ovens and pizza ovens are heavy, but many still sit on casters so the kitchen can clean behind them. The rule is the same as any other appliance: if it rolls, it needs a movable connector and a restraining cable. If it's set in place and never moves, a stationary connector is fine.
- Convection ovens on casters: a 3/4" hose in 36" or 48" covers most installations. Start with the 3/4" x 48" Kit #3.
- Double-stacked ovens: follow the oven manufacturer's instructions for the gas connection. Some stacked units connect each oven separately, and others share a single inlet.
- Deck and pizza ovens set in place: use a stationary connector such as the 3/4" x 36" stationary kit.
Commercial Griddle Gas Hoses
Gas griddles come in two styles, and the style decides the hose. Countertop griddles sit on an equipment stand or counter, and floor-model griddles sit on their own cabinet base. Either one may be on casters.
- Countertop griddles: check the size of the gas inlet and the BTU rating. Smaller countertop griddles often take a 1/2" hose such as the 1/2" x 36" Kit #3. Wider, higher-input griddles may need 3/4".
- Floor-model and wide griddles: more burners mean more gas, so 3/4" is the usual choice. Start with the 3/4" x 36" Kit #3 or the 3/4" x 48" Kit #3.
- Stands on casters: if the griddle's stand rolls, the griddle needs a movable kit with a restraining cable, even though the griddle itself has no wheels.
- Grease: route the hose away from the grease trough and clean around it when the griddle is pulled out.
Commercial Charbroiler Gas Hoses
Charbroilers run hot and use a lot of gas for their size, so the total BTU climbs quickly as the unit gets wider. Check the data plate total against the hose rating at the length you need. A 3/4" BK hose is rated at 184,000 BTU/hr at 48", and the rating drops at longer lengths.
- Floor-model and wide charbroilers: 3/4" is the standard. Start with the 3/4" x 36" Kit #3 or the 3/4" x 48" Kit #3. Very high-input units may need a 1" x 48" Kit #3.
- Countertop charbroilers: like countertop griddles, smaller units may take a 1/2" hose such as the 1/2" x 48" Kit #3. Check the inlet size and BTU rating first.
- Heat and flare-ups: route the hose so it never rests against hot surfaces or sits where grease and flare-ups reach it.
- Hood alignment: charbroilers need to return to the same spot under the hood and fire suppression after cleaning. The Set-Pro kit adds floor placement plates.
Gas Hose BTU Capacity Chart and Sizing
A commercial gas hose is sized by matching the appliance's total BTU input to a hose rated for at least that much gas at the length you need. BK Resources rates its hoses by inside diameter, length and what's installed in line. Most restaurant hookups use a shut-off valve and quick disconnect, and those are the ratings below (BTU per hour, natural gas, 0.5" water column pressure drop, ANSI Z21.69 test method).
| Length | 1/2" hose | 3/4" hose | 1" hose |
|---|---|---|---|
| 24" | 90,000 | 208,000 | 377,000 |
| 36" | 82,000 | 195,000 | 373,000 |
| 48" | 76,000 | 184,000 | 368,000 |
| 60" | 73,000 | 168,000 | 344,000 |
| 72" | 69,000 | 168,000 | 339,000 |
To size the hose:
- Find the BTU input on the appliance's data plate. If one hose feeds more than one appliance, add them together.
- Measure the run from the gas outlet to the appliance inlet with the appliance in its working position. The hose should reach without being pulled tight, looping or touching the floor.
- Pick the smallest diameter rated at or above that input at your length. If it's close, step up a diameter or choose a shorter hose.
For example, a 120,000 BTU/hr fryer 48" from the outlet is too much for a 1/2" hose (76,000) but well within a 3/4" x 48" Kit #3 (184,000). A 180,000 BTU/hr range that needs 60" is over the 3/4" x 60" rating (168,000), so it needs a 1" x 60" kit (344,000) or a shorter 3/4" run.
- The quick disconnect is the biggest restriction. A 3/4" x 48" hose with only a shut-off valve is rated 280,000 BTU/hr; adding the quick disconnect brings it to 184,000.
- Hose only: without a valve or quick disconnect, BK rates the 1/2" x 24" at 163,000 BTU/hr and the 1" x 24" at 872,000.
- Lower pressure drop: to convert to a 0.2" water column drop, multiply by 0.632.
- Propane: BK's ratings are for natural gas. For propane, confirm capacity with BK or your gas supplier.
Commercial Gas Hose vs. Residential Flexible Gas Line
Search for "flexible gas line" and most of what comes up is built for homes: a stove or dryer that's installed once and rarely moves. A commercial kitchen is different. Fryers, ranges and griddles sit on casters and get pulled out for cleaning every night, often while hot and covered in grease.
Fuel gas codes require caster-mounted and regularly moved commercial cooking equipment to be connected with a connector listed for movable gas appliances (ANSI Z21.69 / CSA 6.16). A commercial gas hose is built for that duty, with a protective coating over stainless steel tubing, and it's installed with a restraining cable so the appliance can't be pulled far enough to strain the connection. A residential appliance connector is not a substitute, and inspectors will flag it.
| Commercial gas hose | Residential flexible gas line | |
|---|---|---|
| Made for | Commercial cooking equipment, including equipment on casters | Household appliances that stay in place |
| Standard | ANSI Z21.69 • CSA 6.16, movable gas appliances | Not certified for movable appliances |
| Construction | Heavy-duty T-304 corrugated stainless steel, stainless radial wrap, protective coating | Typically lighter-duty |
| Restraint | Installed with a restraining cable | None |
| Quick disconnect | Available, ANSI Z21.41 • CSA 6.9 | Not typical |
| Sizes | 1/2", 3/4" and 1", 24" to 72" | Mostly small diameters |
Natural Gas or Propane
Every hose and kit on GasHoses.com works with natural gas or propane (LP). The hose doesn't change between gas types; the appliance does. Burner orifices and regulators are set for one gas or the other, so make sure the appliance is set up for the gas your building supplies before it's connected. For natural gas hookups, the same 3/4" kits shown above are the standard choice.
BK's quick disconnect is rated for a maximum fuel gas pressure of 1/2 psi (3.5 kPa) and is approved for 1st, 2nd and 3rd family gases under 50 mbar. Its published BTU ratings are for natural gas, so for a propane appliance near the top of a hose's rating, confirm capacity with BK or your gas supplier.
Quick Disconnects, Restraining Cables and Swivels
A movable gas connection is more than the hose. Each part has a job:
- Quick disconnect: lets staff unhook the gas line to move equipment for cleaning, then reconnect it without tools. The quick disconnect must match the hose diameter, for example the 3/4" quick disconnect.
- Shut-off ball valve: a manual gas shut-off where the hose meets the supply line, such as the 3/4" ball valve. Turn it off before disconnecting.
- Restraining cable: anchors the appliance to the wall so it can't travel farther than the hose allows. Required for caster-mounted equipment and sized by hose length, for example the 48" restraining cable kit.
- Swivel connector: lets the hose rotate instead of twist, which reduces stress on the hose and lets equipment sit closer to the wall. Choose a swivel kit, a double swivel kit, or add a 3/4" swivel to an existing hookup.
- Floor placement system: returns equipment to the same spot under the hood after cleaning, keeping it aligned with fire suppression and ventilation. Available in the Set-Pro kit or on its own as the Set-Pro placement system.
Restraining cable sizes: match the cable to the hose length: 24", 36", 48", 60" or 72". The cable is already included in every BK Kit #1, #2, #3, #9, Swivel Pro and Set-Pro kit, but not with hose-only or hose-and-quick-disconnect listings. BK's 5-year gas hose warranty requires installation with a BK restraining cable kit. Mount the cable bracket to the wall, into studs where possible, and never anchor it to the gas line.
Already have a good valve, quick disconnect and cable? Replace just the hose with an individual 3/4" x 48" hose, or the hose plus a new quick disconnect with the 3/4" x 48" hose and quick disconnect.
Gas Safety in the Commercial Kitchen
Gas leaks are rare in restaurants, but when a connector fails the result can be a fire or explosion, a forced closure, or a denied insurance claim. Many failures trace back to the same causes: worn hoses, equipment pulled out without a restraint, quick disconnects that stick or were installed wrong, and connectors reused from old equipment.
- Use the right connector. Equipment on casters needs a movable-rated commercial gas connector with a restraining cable.
- Install a new hose with new equipment. Codes and manufacturers call for a new connector whenever an appliance is replaced. Never move an installed hose to another appliance.
- Use a qualified installer. Installation must follow the National Fuel Gas Code (NFPA 54 / ANSI Z223.1) and local codes, and be leak tested by qualified personnel.
- Train the closing crew. Staff who pull equipment out for cleaning should know how to shut off the valve, use the quick disconnect and reconnect properly.
- Inspect during cleaning. Check the hose whenever the appliance is pulled out.
Common installation mistakes. BK's installation manual calls out four: sharp bends, twists, double bends, and a hose that touches the floor. Install a manual shut-off valve within 6" of the appliance, offset the two ends of the hose so the appliance can sit closer to the wall, and keep the hose away from anything hotter than 230°F.
Our gas hose installation guide walks through the steps, including the restraining cable, leak testing and disconnecting for cleaning.
When to Replace a Restaurant Gas Hose
Replace the hose if you see cracks, cuts or peeling in the outer coating; kinks or flattened sections; corrosion at the fittings; a gas smell or failed leak test; a quick disconnect that sticks, leaks or won't latch; or a missing or damaged restraining cable. Replace it when you replace the appliance, too.
Buying for Multiple Locations
Outfitting several kitchens or stocking a service van? The 3/4" x 48" Kit #3 case pack includes five complete connection kits, each boxed individually. For braided stainless connectors, see the GOtek kits in 3/4" x 36" and 3/4" x 48". Questions about a larger order? Contact us.
Commercial Gas Hose Questions
Can I use a residential flexible gas line on commercial kitchen equipment?
No. Caster-mounted or regularly moved commercial cooking equipment must be connected with a connector listed for movable gas appliances, installed with a restraining cable. Residential appliance connectors are not rated for that use.
What gas hose length do I need?
Measure from the gas outlet to the appliance inlet with the appliance in its working position, then allow for the distance it moves out for cleaning. Choose the shortest length that covers the run without sharp bends or loops on the floor. 48" is the most common length for a 3/4" restaurant hose.
What gas hose do I need for a restaurant range?
Most full-size restaurant ranges use a 3/4" gas hose, usually 48" or 60" long. A large range with ovens and a high total BTU load may need a 1" hose. Check the range's BTU rating and gas inlet size first.
Do I need a new gas hose when I replace my fryer?
Yes. Install a new gas connector whenever an appliance is replaced. A hose that has been installed and flexed on one appliance should not be moved to another.
How often should a commercial gas hose be replaced?
Replace it when you replace the appliance, and any time inspection shows coating damage, kinks, corrosion, a sticking quick disconnect or a failed leak test. Inspect the hose whenever the appliance is pulled out for cleaning.
How many BTUs does a 3/4" gas hose carry?
With a shut-off valve and quick disconnect, BK Resources rates a 3/4" hose at 208,000 BTU/hr at 24", 195,000 at 36", 184,000 at 48", and 168,000 at 60" and 72" (natural gas, 0.5" water column pressure drop).
Does a quick disconnect reduce gas flow?
Yes. A BK Resources 3/4" x 48" hose is rated 280,000 BTU/hr with a shut-off valve alone and 184,000 BTU/hr with a valve and quick disconnect. Size the hose for the configuration you will install.
Is a restraining cable required on a commercial gas hose?
Yes, for any appliance on casters. The cable anchors the appliance to the wall so it cannot strain the hose, and BK Resources' 5-year gas hose warranty requires a BK restraining cable kit.